Intel® 3rd Generation Core™ i7 Ivy Bridge Processor
Quad-core with Advanced Vector Extensions (AVX) 2.3 GHz 3615QE
Peak performance 147 GFLOPS (peak theoretical)
Threads per core 2
Intel Virtualization Technology
DDR3-1600 8 GB with ECC
Raw memory bandwidth 25 GB/s (total)
Local SATA flash 8 GB
BIOS SPI flash
Mellanox ConnectX-3 VPI Host Card Adaptors
Provides fabric bridging to data plane
Supports DDR or QDR InfiniBand, or 40 Gigabit Ethernet protocols*
*The LDS6523 currently supports DDR Infiniband. Planned variants will support QDR Infiniband or 40 GigE. Variants may require changes to the system infrastructure such as connectors, backplane, etc.
IPMI (System Management)
On-board IPMI Controller
Voltage and temperature monitor
Geographical address monitor
Power/reset control
On-board FRU EEPROM interface
FPGA, CPU and CPLD interfaces
Ethernet Connections
1000BASE-BX Ethernet to P4 connector 2
OpenVPX control plane
10/100/1000BASE-T Ethernet to P4 connector 1
Accessible via OpenVPX RTM or external chassis interface
10/100/1000BASE-T Ethernet connection 1
To front panel (air-cooled module) or backplane P4 connector (conduction-cooled module)
Ethernet functions supported by the chipset include:
UDP, TCP, SCTP, ARP, IPv4, IPv6, IEEE1588, flow control, 802.1P (priority) and 802.1Q (VLAN)
OpenVPX Multi-Plane Architecture
System management via IPMB-A and IPMB-B link on P0 management plane
InfiniBand or 40 Gigabit Ethernet interfaces on P1 data plane
Full x16 or dual x8 Gen2 PCIe® expansion plane to P2 connector
Dual 1000BASE-BX Ethernet control plane
PMC-X/XMC Sites
Mezzanine sites 1 PMC/XMC, 1 XMC only
PCI-X®-to-PCIe bridge Connects PMC site to on-board PCI Express® switch
PMC PCI support 33 and 66 MHz
PMC PCI-X support 66, 100, and 133 MHz
PMC user-defined I/O from J14 to backplane
PCIe XMC sites per VITA 42.3 with XMC user-defined I/O from Jn6 to backplane
Additional I/O Capabilities
One RS-232 serial interface to front panel (air-cooled) or backplane (conduction-cooled)
Configurable for RS-232 or RS-422 signaling when routed to backplane
One additional RS-232/RS-422 serial interface to backplane
One front-panel USB 2.0 interface (air-cooled configurations only)
One USB 2.0 interface to backplane
One USB 3.0 interface to backplane
One front-panel DisplayPort interface (with optional I/O adaptor)
One DVI interface to backplane
One front-panel eSATA interface (with optional I/O adaptor)
Two SATA interfaces to backplane
Eight single-ended GPIO interfaces to backplane
System signals to backplane
NVMRO, ChassisTest, Environmental Bypass, MemoryClear
Mechanical
6U VPX (air-cooled and conduction-cooled)
1.0” slot pitch
OpenVPX™ and VPX-REDI
Environmental
Air-Cooled – Commercial
Temperature
Operating 0°C to 40°C*
Storage -40°C to +85°C
*Customer must maintain required cfm level
Humidity
Operating 10-95%, non-condensing
Vibration 0.003 g2/Hz; 20-2000 Hz, 1 hr/axis
Shock 20g, z-axis; 32g, x-, y-axes; 11 ms half-sine pulse
Altitude
Operating 0-10,000 ft*
*Customer must maintain required cfm level
Compliance
OpenVPX System Specification encompasses VITA 46.0, 46.3, 46.4, 46.6, 46.11
Compatible with VITA 65
VITA 46/48.1/48.2 (REDI)
Serial RapidIO®, PCI Express®, 10 Gigabit Ethernet