Atlanta Micro has provided some states representative of various notch locations. Due to the analog tuning nature of the part, it would be difficult to provide all combinations of VT1 and VT2 to target specific center frequencies and bandwidths. As such, for any desired data points outside of what is provided it is recommended to purchase an evaluation board for the AM3129 so that you may determine desired settings.

AM3129_Bypass_SingleSided.s2p represents the path from RF1/RF2 to either Byp1A/B or Byp2A/B. For example, if one was to simulate what an external filter connected between bypass ports was to look like, cascade AM3129_Bypass_SingleSided.s2p, your desired filter response, and then AM3129_Bypass_SingleSided.s2p again. If used only as a switch and the path does not return to the AM3129, cascade only one instance of AM3129_Bypass_SingleSided.s2p

Contact support@atlantamicro.com if you have any questions about what is written above.