Product Quick Search

  * Not including RF components

Echotek Series SCFE-V6-OVPX Virtex-6 FPGA Processing Engine

Product Description

The SCFE-V6-OVPX provides high-performance processing for applications requiring extreme FPGA processing power, such as EW, ELINT, SIGINT, RADAR, Commercial Wireless, and Deep Packet Inspection. Utilizing top-end FPGAs available from market leader Xilinx®, the SCFE-V6-OVPX solves the toughest signal processing problems in a cost-effective form factor. VITA 57 FPGA Mezzanine Card (FMC) mezzanine sites and OpenVPX (VITA 65) Rear Transition Modules (RTMs) provide diverse sensor and I/O entry points, both analog and digital. When incorporated with the Mercury Ensemble™ multi-computing OpenVPX modules, the SCFE-V6-OVPX represents an essential building block in powerful heterogeneous subsystems that can be tailored to specific applications and platforms. 
  • Features
  • Benefits
  • Specs
  • Request Form
• Next-generation architecture for high-end defense and commercial applications such as SIGINT, EW, Comms, RADAR, Commercial Wireless, and Deep Packet Inspection
• Ultimate processing power with three Xilinx® Virtex™-6 LX240Ts or SX315Ts
• VITA 57 FMC sites for flexible I/O enhancements, including Echotek® Series multi-channel digitizer FMCs
• High-speed OpenVPXTM interface fully compatible with EnsembleTM OpenVPX modules

• FPGA Processing Power
• FPGA Connectivity
• EchoCore™ IP Advantage
• Flexible Control-Plane Processor
• Flexible I/O with FMC Sites
• Optimized Memory
• SecureConfig
• OpenVPX Backplane Interfacing
• Software and System Management

 Xilinx Virtex-6 LX240T or Virtex-6 SX315T, Speed-Grade 2i

DDR-III SDRAM6 banks of 512 MB (128M x 32 at 800 MHz)
Half-duplex bandwidth (unidirectional) 3.2 GBps
Full-duplex bandwidth (bidirectional) 1.6 GBps
3 banks of 18 MB (4M x 36 at 500 MHz)
Full-duplex bandwidth 4.5 GBps

LVDS 80 pairs at up to 1 GHz
GTX SerDes 8 lanes up to 6.25 Gb/s each
Inter-FPGA network
8 full-duplex HSDL lanes at 1.0 Gbps (1.0 GB/s) or
16 half-duplex HSDL lanes at 1.0 Gbps (2.0 GB/s)

160W assumes MAX load of 30W per each of three user
programmable FPGAs:
11.7A @ 12V rail
3.0A @ 5V rail
1.5A @ 3.3V rail 

Air-Cooled – Commercial
Operating 0°C to 40°C*
Storage -40°C to +85°C