Product Quick Search

  * Not including RF components

ENSEMBLE® 6000 Series HDS6601 High Density Server OpenVPX Xeon-EP

Product Description

The HDS6601 is a high-density server signal and data processing engine, harnessing two of the latest generation of server-class Sandy Bridge octal-core Intel Xeon® processors for the most demanding applications. The HDS6601 combines this processing performance with a next-generation POET fabric bridge, scaling the module’s I/O infrastructure to match the unparalleled embedded processing performance of server-class Intel processors.

By leveraging the power of Intel server-class processing in combination with the on-board integrated high-performance PCI Express and fabric infrastructure, the HDS6601 delivers a well-balanced and scalable computing architecture. The HDS6601 is capable of providing ground-breaking levels of processing power for high-end radar, signal intelligence and image processing applications, as well as data-intensive commercial applications, in a standard 6U OpenVPX form factor.

  • Features
  • Benefits
  • Specs
  • Request Form
  • 6U OpenVPX compliant
  • Two octal-core Sandy Bridge server-class Intel® processors provide 16 cores at 1.8 GHz
  • Total of 460 GFLOPS peak in a single slot
  • Serial RapidIO® and/or 10 Gigabit Ethernet fabric enabled
  • 32 GB of DDR3-1600 SDRAM with 102 GB/sec peak performance
  • Integrated PCI Express® infrastructure for co-processing and I/O expansion plane communications
  • Multiple I/O options, including Gigabit Ethernet, RS-232, RS-242, GPIO, and SATA
  • Advanced system management subsystem
  • Mercury MultiCore Plus® software infrastructure support
  • Server class processing in a rugged embedded form factor is suitable for the most demanding deployed applications
  • Large 32 GB of DRAM supports memory-intensive applications such as high-end radar and persistent ISR
  • QPI interconnect supports SMP operating environment for easy programmability
  • Flexible and versatile POET enables scalable, high speed, and deterministic communications and IO
  • 20 MB on-chip cache allows crucial calculations to remain cache-resident, accelerating processing
  • Optimal balance between I/O and processing to prevent data starvation
Intel® 32-nm Sandy Bridge–Class Processor
Two Octal-core E5-2648L Sandy Bridge server-class processors at 1.8 GHz each
Peak performance 460 GFLOPS
Threads per core 2
QPI interface between processors
2 x 25.6 GB/s peak performance
Intel® Virtualization Technology
Dual Integrated x16 Gen2 PCI Express® interface
DDR3-1600 32 GB with ECC
Raw memory bandwidth 102 GB/sec
BIOS SPI flash Dual 8 MB partitions
NAND flash 8 GB, SATA interface

Virtex® 6 HX380T Field-Programmable Gate Array (FPGA)
Provides fabric bridging to data plane
Can act as co-processor executing iFFT/FFT, image or signal processing
Configured from CPU or dedicated configuration ROM

Ethernet Connections
1000BASE-BX Ethernet to P4 connector 2
OpenVPX Control Plane
10/100/1000BASE-T Ethernet to P4 connector 1
Accessible via OpenVPX RTM or external chassis interface
10/100/1000BASE-T Ethernet connection 1
to front panel (air-cooled module), or to backplane (conduction-cooled module)

Ethernet functions supported by the chipset include:
UDP, TCP, SCTP, ARP, IPv4, IPv6, IEEE1588, flow control,
802.1P (priority), 802.1Q (VLAN)

IPMI (System Management)
On-board IPMI controller
Voltage and temperature monitor
Geographical address monitor
Power/reset control
FRU and on-board EEPROM interfaces
FPGA, CPU and CPLD interfaces

OpenVPX® Multi-Plane Architecture
System Management via IPMB-A and IPMB-B link on P0 management plane
Dual 4x Serial RapidIO® or 10 Gigabit Ethernet interfaces on P1 data plane
Dual full x16 or dual x8 PCIe® expansion plane
Dual 1000BASE-BX Ethernet control plane

Additional I/O Capabilities
RS-232 serial interface 1
to front panel (air-cooled), or to backplane (conduction-cooled)
Configurable for RS-422 signaling when routed to backplane
RS-422 serial interface to backplane 1
RS-232 serial interfaces to backplane 2
Front-panel USB 2.0 interface 1
(air-cooled configurations only)
USB 2.0 interfaces to backplane 2
Front-panel eSATA interface 1
(air-cooled configurations only)
SATA interfaces to backplane 2
Single-ended GPIO interfaces to backplane 8
System signals to backplane
NVMRO, ChassisTest, Environmental Bypass, MemoryClear

6U OpenVPX (air-cooled and conduction-cooled)
1.0” slot pitch

Please check the datasheet.