Skip to main content


Accelerate your mission with GPGPU Computing

For rugged GPGPU computing applications, Mercury’s EnterpriseSeries of processing solutions includes the Themis RES-NT2 1U high-performance computer (HPC) product range. RES-NT2 combines one NVIDIA® TESLA GPU accelerators, two Intel® E5 2600 Xeon® processors, and up to 1 TB ECC DDR4 memory in a resilient, lightweight, and shallow 1U chassis. The RES-NT2 performs in harsh environments where optimized SWaP is critical.

RES-NT2 supports all NVIDIA GPGPU Accelerators including M10, M60, P4, P40, K80, P100, and V100.

The RES-NT2-1RU HPC is designed with superior resilience to environmental extremes that include shock, vibration, and temperature extremes. This expertise in thermal and kinetic management design keeps mission-critical applications available, improves life-cycle management, and reduces the total cost of ownership. The system’s aluminum chassis is typically half the weight of a standard steel chassis and operates reliably in hot or cold environments to save power.

Quadro® Virtualization

Fully compatible with popular virtualization technologies, the RES-NT2 with NVIDIA Quadro GPGPUs enables multiple virtual machines to have direct access to high-performance graphic processing such as 3D visualization, visual simulation, and virtual reality.

TESLA™ Supercomputing

Designed for artificial intelligence, deep learning, and simulation applications, the RES-NT2 with NVIDIA TESLA GPGPUs delivers record speeds for video and signal processing, simulation, modeling, and computational physics. With teraflops of single and double precision performance, NVIDIA TESLA computing accelerators are the world’s fastest and most efficient high-performance computing companion processors.

2 Intel E5 2600 series Xeon® v3/v4 processors with up to 18 cores per processor
Up to 2 double slot NVIDIA Tesla or Quadro GPU accelerators
Up to 1TB memory with 16 DIMM slots, 2400MHz

Management and Operating System
Windows®, Linux®, VMWARE® and other hypervisors
IPMI v2.0, Redfish option available
TPM 1.2 or 2.0 support
Onboard RAID controller
supports SAS3/HBA controller or SATA drive onboard controller

Expansion and Modular Maintability
2 Disk on Module (up to 128GB per DOM)
2 PCIe 3.0 card options:
(1) PCIe 3.0 x16 GPU slot + (1) PCIe 3.0 x8 (in a x16 slot)

Input/Output Versatility
Front Access
2 removable, hot pluggable, 2.5” SATA/SAS3 drives, U.2 NVME option available
1 power switch
Rear Access
2 1GBaseT Ethernet Ports (RJ45)
2 USB 3.0
1 IPMI 2.0
1 VGA graphic Port

Power Supply Options
Single or Redundant 100/240V VAC (47/63Hz, 400Hz)
Single or Redundant 10-36 VDC, 32 Amps
Single or Redundant 36-72 VDC, 18 Amps

Additional Options
Shock pins
Front door filter
Slide rails

Temperature: 0°C to 50°C
Extended temperature: -15°C to 65°C
Humidity: 8% to 95% (non-condensing)
Shock: 3 axis, 35g, 25ms
Vibration: 4.76Grms, 10Hz to 2000 Hz (SSD)
Temperature: -40°C to 70°C
Humidity: 5% to 95% (non-condensing)

Height: 1U or 1.75” inches (44.45mm)
Width: 17 inches (433.3mm)
Depth: 25 inches (635mm)
Weight (Typical)*: 24 pounds (10.9kg)
19" rackmountable

* Mercury Systems designs all products to meet or exceed listed data sheet specifications. Some specifications including I/O profiles, weight, and thermal profiles are configuration dependent. Contact Mercury for information specific to your desired configuration requirements.