Skip to main content Skip to main content

XR5 RES HD Modules


Featuring Intel® Xeon® E5-2600 v3/v4 series processors, XR5 RES HD modules plug into 9.9″ wide HDslim and 17″ wide Themis RES HD chassis sub-racks.

Processor modules support up to three 56 Gbps Infiniband (IB) or 40 Gb Ethernet ports to provide industry leading I/O bandwidth. A FDR option supports 56 Gbps IB or 40 Gbps Ethernet via a QSFP connector. Alternatively, a QDR option supports 40 Gbps IB or 10 Gbps Ethernet. Each processor module also has a PCIe expansion slot that supports two additional FDR or QDR ports.


System Features

  • Intel® Xeon® E5-2600 v3/v4 series processors with up to twenty cores
  • Commercial Off the Shelf (COTS) motherboards
  • Resilient to shock, vibration, and temperature extremes.
  • Up to three 56 Gb/sec Infiniband (IB) or 40 Gb Ethernet ports
  • Maximum system configuration flexibility for future compute and storage requirements
  • Fit in standard commercial racks or rugged mobile transit cases
  • MIL-STD 810 and MIL-STD 461

Chassis Options

XR5 RES HD modules plug into 4 bay HDslim and 4 or 6 bay Themis RES-HD chassis sub-racks. The XR5 RES HD “plug and pull” configurable modules can be mixed and matched according to application needs.


XR5 RES HD Module Specifications

System Management Module

The resource module provides remote independent initialization, administration, and monitoring of the health and environment of one or more modules or servers and related computing infrastructure equipment, including fault data history, analytics and prognostics. The Resource Manager provides a single user interface for easy access to managed systems’ service processors, displaying information obtained from these processors in a converged dashboard view.  It leverages open standards such as Open Stack Dashboard (Horizon) and Zabbix, a highly efficient, enterprise-class open source distributed monitoring solution for networks and applications.

Functionality

  • Number of ports: fourteen ports
  • Performance switching capacity: 48 Gbps
  • Maximum forwarding rate: 35.71 Mpps
  • MAC address table size: 8K entries
  • Packet buffer: 3.5 Mbits
  • Forwarding mode: store and forward
  • IEEE 802.3 compliant
  • IEEE 802.3u compliant
  • IEEE 802.3ab compliant
  • Supports half/full-duplex operation at 10/100Mbps
  • Supports full-duplex operation at 1000Mbps
  • Supports auto-negotiation for each port
  • Auto MDI/MDIX
  • IEEE 802.3x flow control support
  • IEEE 802.3az compliant

The RES-HDC Processor Module is a stand-alone server that occupies a single HD chassis slot with two processor sockets, eight DIMMs (8, 16, or 32 GB), and up to three high-bandwidth I/O ports. Intel E5-2600 v3/v4 series processors enable 50% increase in computing density with Themis RES family of servers. Computing density can be measured by cores/volume or cores/kg. Intel E5-2600 v3/v4 series processors are socket compatible with the complete RES family of servers.

RES-HDC Processor Module Specifications

  • Processor
    • Two Intel Xeon E5-2600 v3/v4 series with up to twenty cores per socket*
  • Memory
    • Up to 32 GB memory modules for a total of 256 GB DDR4 ECC
  • Ethernet Support
    • 56 Gb/s Infiniband, 40 Gb/s Ethernet, 10 Gb/s Ethernet (option)
  • Interface
    • Copper or fiber
  • Remote Management
    • BMC
  • Boot Options
    • PXE or DOM
  • Expansion Slot
    • One PCIe 3.0 x16

RES-HDC Processor Module Rear Pannel I/O

  • RJ-45 Gigabit Ethernet LAN Ports 2
  • RJ-45 Dedicated IPMI LAN Ports 1
  • PCIe 3.0 x 16 Expansion Slot 1
  • Fast UART 16550 Port 1
  • USB 2.0 Ports 1
  • QSFP (quad small form-factor pluggable) Controller 1
  • Status LED Indicators 1
  • Power Switch 1 or 2
  • VGA Port 1

High-Speed Switch Module

The RES Switch module occupies one chassis slot with a 12-port, managed 56 Gb/s Infiniband VPI SDN/40GBe switch system that delivers up to 1.3Tb/s of non-blocking bandwidth and 200ns port-to-port latency. The Switch module enables data centers to scale out with Fourteen Data Rate (FDR) Infiniband.

Mellanox switching technology provides industry-leading performance, power, and density. The HD hosted switch also interoperates with existing networks, supports Software Defined Networks (SDN), and provides fabric management for cluster and converged I/O applications. Additionally, with a break out cable, each QSFP port can support four ports of 10GbE for a total of 48 10GbE ports.

Functionality

  • 12 QSFP non blocking ports with aggregate
  • data throughput up to 1.344 Tb/s (FDR)
  • QSFP controller supports
  • 56Gb IB / 40GbE / 10GbE VPI ConnectX3
  • Port-to-port latency 200ns
  • Compliant with IBTA 1.21 and 1.3
  • 9 virtual lanes: 8 data + 1 management
  • 256 to 4Kbyte MTU
  • 4x48K entry linear forwarding data base

Management Ports

  • 100/1000 Ethernet port
  • RS232 port over DB9
  • Mini USB

Device Management

  • CLI or SNMP

Fabric Management

  • On-board SM for fabrics up to 648 nodes
  • Unified Fabric Manager™ (UFM™) Agent

Connectors and Cables

  • QSFP connectors
  • Passive copper or active fiber cables
  • Fiber media adapters
  • QSFP to SFPT adaptors

Indicators

  • Per port status LED Link, Activity
  • System status LEDs: System, fans, power supplies
  • Port Error LED
  • Unit ID LED

RES-HDS8 Storage Module

The RES-HDS8 Storage module occupies two chassis slots with two processor sockets, eight DIMMs (8, 16, 32, or 64 GB), up to three high-bandwidth I/O ports, one RAID controller, and eight 2.5 inch SAS/SATA HDD/SDD disk slots for up to 16 TB of storage with integrated RAID/Storage Controller and mSATA Boot Drive. The RES-HDS8 Storage module includes a companion RES-HDC processor module with two Intel Xeon E5-2600 v3/v4 series processors with up to twenty cores per socket.

Specifications

  • Processor
    • Two Intel Xeon E5-2600 v3/v4 series with up to twenty cores per socket
  • Memory
    • Up to 64 GB memory modules for a total of 512 GB DDR4 ECC
  • Ethernet Support
    • Gigabit Ethernet, QDR, or FDR
  • Interface
    • Copper or fiber
  • Remote Management
    • BMC
  • Boot Options
    • PXE or storage canister boot mSATA
  • Expansion Slot
    • One PCIe 2.0 x8
  • SAS/SATA Drives
    • Eight 2.5 inch SAS/SATA drives (HDD or SDD) in a single removable storage canister
  • RAID Controller
    • LSI00200

HDS Storage Module

The RES-HDS module occupies two chassis slots with two processor sockets, eight DIMMs (8, 16, or 32 GB), up to three high-bandwidth I/O ports, and four 3.5 inch disk slots. The RES-HDS module includes a companion RES-HDC processor module.

Specifications

  • Processor
    • Two Intel XeonE5-2600 v3/v4 series with up to twenty cores
  • Memory
    • Up to 32 GB memory modules for a total of 256 GB DDR4 ECC
  • Ethernet Support
    • Gigabit Ethernet, QDR, or FDR
  • Interface
    • Copper or fiber
  • Remote Management
    • BMC
  • Boot Options
    • PXE or storage canister
  • Expansion Slot
    • One PCIe 3.0 x16
  • SATA Drives
    • Four 3.5 inch SATA drives in a single removable storage canister

System Management Module

The resource module provides remote independent initialization, administration, and monitoring of the health and environment of one or more modules or servers and related computing infrastructure equipment, including fault data history, analytics and prognostics. The Resource Manager provides a single user interface for easy access to managed systems’ service processors, displaying information obtained from these processors in a converged dashboard view.  Themis’ i7 based Resource Manager leverages open standards such as Open Stack Dashboard (Horizon) and Zabbix, a highly efficient, enterprise-class open source distributed monitoring solution for networks and applications.

Functionality

  • Number of ports: fourteen ports
  • Performance switching capacity: 48 Gbps
  • Maximum forwarding rate: 35.71 Mpps
  • MAC address table size: 8K entries
  • Packet buffer: 3.5 Mbits
  • Forwarding mode: store and forward
  • IEEE 802.3 compliant
  • IEEE 802.3u compliant
  • IEEE 802.3ab compliant
  • Supports half/full-duplex operation at 10/100Mbps
  • Supports full-duplex operation at 1000Mbps
  • Supports auto-negotiation for each port
  • Auto MDI/MDIX
  • IEEE 802.3x flow control support
  • IEEE 802.3az compliant